 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| April 1996 NDP6050L / NDB6050L N-Channel Logic Level Enhancement Mode Field Effect Transistor General Description These logic level N-Channel enhancement mode power field effect transistors are produced using Fairchild's proprietary, high cell density, DMOS technology. This very high density process has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulses in the avalanche and commutation modes. These devices are particularly suited for low voltage applications such as automotive, DC/DC converters, PWM motor controls, and other battery powered circuits where fast switching, low in-line power loss, and resistance to transients are needed. Features 48A, 50V. RDS(ON) = 0.025 @ VGS = 5V. Low drive requirements allowing operation directly from logic drivers. VGS(TH) < 2.0V. Critical DC electrical parameters specified at elevated temperature. Rugged internal source-drain diode can eliminate the need for an external Zener diode transient suppressor. 175C maximum junction temperature rating. High density cell design for extremely low RDS(ON). TO-220 and TO-263 (D2PAK) package for both through hole and surface mount applications. _______________________________________________________________________________ D G S Absolute Maximum Ratings Symbol VDSS VDGR VGSS ID Parameter Drain-Source Voltage T C = 25C unless otherwise noted NDP6050L 50 50 16 25 48 144 100 0.67 -65 to 175 275 NDB6050L Units V V V Drain-Gate Voltage (RGS < 1 M) Gate-Source Voltage - Continuous - Nonrepetitive (tP < 50 s) Drain Current - Continuous - Pulsed A PD Total Power Dissipation @ TC = 25C Derate above 25C W W/C C C TJ,TSTG TL Operating and Storage Temperature Maximum lead temperature for soldering purposes, 1/8" from case for 5 seconds (c) 1997 Fairchild Semiconductor Corporation NDP6050L Rev. C / NDB6050L Rev. D Electrical Characteristics (TC = 25C unless otherwise noted) Symbol Parameter Conditions Min Typ Max Units DRAIN-SOURCE AVALANCHE RATINGS (Note 1) W DSS IAR BVDSS IDSS IGSSF IGSSR VGS(th) RDS(ON) Single Pulse Drain-Source Avalanche Energy VDD = 25 V, ID = 48 A 200 48 mJ A Maximum Drain-Source Avalanche Current OFF CHARACTERISTICS Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current VGS = 0 V, ID = 250 A VDS = 50 V, VGS = 0 V TJ = 125C Gate - Body Leakage, Forward Gate - Body Leakage, Reverse VGS = 16 V, VDS = 0 V VGS = -16 V, VDS = 0 V VDS = VGS, ID = 250 A TJ = 125C Static Drain-Source On-Resistance VGS = 5 V, ID = 24 A TJ = 125C VGS = 10 V, ID = 24 A ID(on) gFS On-State Drain Current Forward Transconductance VGS = 5 V, VDS = 10 V VDS = 10 V, ID = 24 A VDS = 25 V, VGS = 0 V, f = 1.0 MHz 48 10 1 0.65 50 250 1 100 -100 V A mA nA nA ON CHARACTERISTICS (Note 1) Gate Threshold Voltage 2 1.5 0.025 0.04 0.02 A S V DYNAMIC CHARACTERISTICS Ciss Coss Crss tD(on) tr tD(off) tf Qg Qgs Qgd Input Capacitance Output Capacitance Reverse Transfer Capacitance 1630 460 150 2000 800 400 pF pF pF SWITCHING CHARACTERISTICS (Note 1) Turn - On Delay Time Turn - On Rise Time Turn - Off Delay Time Turn - Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge VDS = 48 V, ID = 48 A, VGS = 5 V VDD = 30 V, ID = 48 A, VGS = 5 V, RGEN = 15 , RGS = 15 15 320 49 161 36 8.2 21 30 500 100 300 60 nS nS nS nS nC nC nC NDP6050L Rev. C / NDB6050L Rev. D Electrical Characteristics (TC = 25C unless otherwise noted) Symbol Parameter Conditions Min Typ Max Units DRAIN-SOURCE DIODE CHARACTERISTICS IS ISM VSD Maximum Continuos Drain-Source Diode Forward Current Maximum Pulsed Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage VGS = 0 V, IS = 24 A (Note 1) TJ = 125C trr Irr Reverse Recovery Time Reverse Recovery Current VGS = 0 V, IF = 48 A, dIF/dt = 100 A/s 35 2 75 3.6 48 144 1.3 1.2 140 8 ns A A A V THERMAL CHARACTERISTICS RJC RJA Thermal Resistance, Junction-to-Case Thermal Resistance, Junction-to-Ambient 1.5 62.5 C/W C/W Note: 1. Pulse Test: Pulse Width < 300 s, Duty Cycle < 2.0%. NDP6050L Rev. C / NDB6050L Rev. D Typical Electrical Characteristics 100 2 VGS = 10V I D , DRAIN-SOURCE CURRENT (A) 80 6.0 4.5 R DS(on) , NORMALIZED DRAIN-SOURCE ON-RESISTANCE V 5.0 GS = 3.0V 3.5 4.0 1 .5 60 4.5 5.0 5.5 1 4.0 3.5 3.0 2.5 40 6.0 10 20 0 0 1 2 3 VDS , DRAIN-SOURCE VOLTAGE (V) 4 5 0 .5 0 20 I D 40 60 80 100 , DRAIN CURRENT (A) Figure 1. On-Region Characteristics Figure 2. On-Resistance Variation with Gate Voltage and Drain Current 2 2 I D = 24A DRAIN-SOURCE ON-RESISTANCE VGS = 5.0V DRAIN-SOURCE ON-RESISTANCE 1.8 1.6 1.4 1.75 V GS = 5V R DS(on), NORMALIZED TJ = 125C R DS(ON), NORMALIZED 1.5 1.25 25C 1.2 1 0.8 0.6 1 0.75 -55C 0.5 -50 -25 0 25 50 75 100 125 T J , JUNCTION TEMPERATURE (C) 150 175 0 20 40 60 80 100 I D , DRAIN CURRENT (A) Figure 3. On-Resistance Variation with Temperature Figure 4. On-Resistance Variation with Drain Current and Temperature 60 GATE-SOURCE THRESHOLD VOLTAGE 1.3 VDS = 10V 50 I D , DRAIN CURRENT (A) T = -55C J 25C 125C V GS(th) , NORMALIZED 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 -50 VDS = VGS I D = 250A 40 30 20 10 0 1 2 3 4 5 VGS , GATE TO SOURCE VOLTAGE (V) -25 0 25 50 75 100 125 TJ , JUNCTION TEMPERATURE (C) 150 175 Figure 5. Transfer Characteristics Figure 6. Gate Threshold Variation with Temperature NDP6050L Rev. C / NDB6050L Rev. D Typical Electrical Characteristics (continued) 1.15 DRAIN-SOURCE BREAKDOWN VOLTAGE 80 I D = 250A IS , REVERSE DRAIN CURRENT (A) 1.1 10 TJ = 125C 25C BV DSS , NORMALIZED 1 1.05 -55C 0.1 1 0.01 0.95 0.001 V GS = 0V 0.0001 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 V SD , BODY DIODE FORWARD VOLTAGE (V) 1.8 0.9 -50 -25 0 25 50 75 100 125 TJ , JUNCTION TEMPERATURE (C) 150 175 Figure 7. Breakdown Voltage Variation with Temperature Figure 8. Body Diode Forward Voltage Variation with Current and Temperature 4000 3000 V GS, GATE-SOURCE VOLTAGE (V) 2000 CAPACITANCE (pF) 10 I D = 48A Ciss 8 V DS = 12V 48V 24V 1000 6 500 300 200 Coss 4 f = 1 MHz V GS = 0 V Crss 2 100 1 2 V DS 0 3 5 10 20 30 50 0 20 , DRAIN TO SOURCE VOLTAGE (V) 40 Q g , GATE CHARGE (nC) 60 80 Figure 9. Capacitance Characteristics Figure 10. Gate Charge Characteristics V DD t d(on) VIN D t on tr 90% to f f t d(off) 90% tf RL VOUT DUT VGEN VO U T 10% 10% INVERTED R GEN R GS G 90% S V IN 10% 50% 50% PULSE W IDTH Figure 11. Switching Test Circuit Figure 12. Switching Waveforms NDP6050L Rev. C / NDB6050L Rev. D Typical Electrical Characteristics (continued) 40 300 T J = -55C , TRANSCONDUCTANCE (SIEMENS) 30 200 100 I D , DRAIN CURRENT (A) 25C 125C RD 50 S( O Lim N) it 10 1m 0 s 10 s s 20 20 10 5 10 10 VGS = 5V SINGLE PULSE RJC = 1.5 o C/W T C = 25C 0m s DC ms 10 g FS V DS =10V 0 0 10 20 ID , DRAIN CURRENT (A) 30 40 2 1 1 2 3 5 10 20 30 50 100 V DS , DRAIN-SOURCE VOLTAGE (V)) Figure 13. Transconductance Variation with Drain Current and Temperature Figure 14. Maximum Safe Operating Area 1 TRANSIENT THERMAL RESISTANCE 0.5 0.3 0.2 D = 0.5 r(t), NORMALIZED EFFECTIVE 0.2 0.1 R JC (t) = r(t) * RJC R JC = 1.5 C/W 0.1 0.05 P(pk) 0.05 0.03 0.02 0.01 0.01 0.02 0.01 Single Pulse t1 t2 TJ - T C = P * R JC (t) Duty Cycle, D = t 1 /t2 0.1 0.2 0.5 1 2 5 t1 ,TIME (m s) 10 20 50 100 200 500 1000 0.02 0.05 Figure 15. Transient Thermal Response Curve NDP6050L Rev. C / NDB6050L Rev. D |
Price & Availability of NDB6050L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |